TRISM Requirements TRISM Host Requirements   TRISM HOST is designed to run on a typical Windows or Vista environment. The PC needs a Pentium III equivalent or higher, with a minimum of 128MB of RAM. T-Host operates on Windows2000 SP4, Windows NT 4.0 or WindowsXP. It needs one available COM Port for the security module. It will need more COM or USB ports if the client software or any hardware is loaded on the same PC.     TRISM Client Requirements   TRISM CLIENT(ITC) is designed to run on a typical Windows or Vista installation. The PC needs a Pentium II equivalent of higher with a minimum of 128 of RAM. ITC operates on Windows98 SE, Windows 2000, Windows NT 4.0, or Windows XP. You will need one USB port for the encrypting PIN Pad.     Instant Issuance Hardware  (More Information)   The Card embossers to issue cards need an IP address to run. If you only have one embosser it can be hooked to the HOST PC and use the same COM port. For each additional embosser you will have to get network adapters. Each network adapter needs the bank to assign an IP address and have a network drop available during installation.     Re-PIN Devices  (More Information)   If you get a Re-PIN device from us, you have several options. For a Reader/Encoder Device you will need a Serial or USB port on the Client PC (With the PIN pad this will be 2 ports needed). You will need to let us know which port is available so we can supply the correct cable. For an OSCARE you will need to purchase a network adapter, assign an IP address, and have a network drop ready. For an OSCARE Professional you will need to assign an IP address, and have a network drop ready.     TRISM Photo ID System Requirements  (More Information)   There are three different components to a PHOTO ID system. You have the camera, the photo printer, and the license. All three components need a USB port. The PC you install the camera on will need to be a Client PC so it will need at least 2 USB ports (remember the PIN Pad adds one). The PC you install the printer and the license on need to be the same (This will require two USB ports). Photo ID systems need Windows2000 SP4, Windows XP, or Windows Vista.   Back to TRISM Home